Concrete Curing Systems from CDS Inc. - Concrete Curing for Precast Concrete

Because the system is a worldwide product, CDS are fully conversant with the regulations that may occur in various countries and can provide systems that are technically and regulatory approved.

Once any system has been installed it is the one of CDS greatest advantages that the system is extremely user friendly, the control system can be integrated with the existing or new plant and equipment, giving the customer exactly what they want.

The CDS Enivrocure System also offers the customer no real specialist equipment. All the equipment we use are usually off the shelf preparatory equipment, so if in the unlikely event of a piece of equipment failing, spare parts are usually available locally or if not, ex-stock CDS.

The CDS service department has a wealth of experienced engineers that can provide telephone assistance or on-site back-up. CDS prides itself on its service and after sales service. Having many Blue-Chip international companies it has always been an essential service that CDS will assist all our customers to provide a service bar none. CDS works on a strong pedigree of repeat business and we do this with a strong team of dedicated staff.

Our team knows that service of our customers is imperative... SERVICE... SERVICE... SERVICE.

Strength

•

Early strength gain. Products can be cubed and packed in less time where required. The reduction in rack capacity and pallet quantity can pay for a CDS Curing System. Ship to your customers faster with confidence - reduce work in progress and dramatically reduce stock levels.

•

Cubing and packing strength at 12 to 24 hours - for building block manufacturers. Cubing and packing strength often are the limiting factors on cement content - which means that more cement is used than necessary to achieve final specified strength - wasting cement. The CDS System gives consistent curing at all positions in the curing chambers - so every product is cured in the same way. The curing regime can be optimised to ensure that strengths are achieved with minimum cement content.

•

Early demould strength - for wet casters. Reduce mould inventory and turn round moulds twice or three times per day. Reduce rejects and product damage due to poor early strength.

Product Quality
•	Consistent curing conditions at all positions in the racks or curing chambers - resulting in consistent colours and consistent strength development.
•	Virtual elimination of efflorescence - due to low surface evaporation and an enriched CO² atmosphere.
•	Brighter and more consistent colours. Enhance product quality, reduce reject levels, reduce customer complaints. Additionally, with live steam and uncontrolled curing systems the colour of decorative concrete products can vary within the rack or curing chamber. The controlled environment and air circulation on the CDS system elminates this problem.
•	More abrasion resistance surface - due to low surface evaporation the water/cement ratio throughout the product is maintained at the desired level.

Eliminate Condensation
•	Freedom from condensation. In many curing systems, condensation occurs causing product damage, accelerated rack and building structure corrosion, damage and failure of electronics on finger cars, etc. ONLINE HANDLING AND PROCESSING - AT LESS THAN 24 HOURS.
•	Online rumbling, shotblasting, splitting, post processing, grinding, polishing, bush hammering, etc. Eliminate costly double handling, wasted strap and other packing materials. This applies to all machine made paving, architectural masonry, split sone and related products.