The CDS Envirocure System is the ideal system for the curing of both small and large pre-cast concrete items. The theory remains the same:
• Accurate Temperature Control
• Accurate Humidity Control
• Recirculation and Energy Saving
• Good Insulation
• Time in the Curing Environment

Of course, there are the manufacturers who demand little or no air movement, so therefore we are able to design the system using our wealth of knowledge which would provide the system and environment specified by the customer.

A CDS Envirocure Curing System allows the plant to run in a closed loop.

Curing starts immediately after a chamber is filled with product, and depalletising of the cured products starts as soon as the curing cycle is completed for that product run.

The system is pre-programmed to ensure that chambers are opened at the exact time when the product is cured to the required specification.

CDS curing chambers are designed to account for heat transfer to the concrete pipe and the required humidity. Heat and moisture balance over the curing time is precise.